Not every swimming pool is surrounded by a perfectly flat concrete area. Melbourne properties can include timber decks, paving, tiled surrounds, garden areas and changes in ground level, sometimes all within the same backyard.
The good news is that glass pool fencing can be used across a wide range of settings.
What matters is not simply what the surface looks like. The condition and support beneath the proposed fence line also need to suit the fencing being installed.
Concrete is a common surface around swimming pools and can accommodate glass pool fencing.
The existing concrete needs to be suitable for the fencing system and in appropriate condition. Older pool surrounds may have cracks, movement or sections that have been altered over time, so the surface should not automatically be treated as suitable simply because it is concrete.
Where the concrete is appropriate, the pool fence can be positioned to work with the existing pool surround without requiring the entire area to be replaced.
Paved pool areas can also accommodate pool fencing, although the paving itself is only one part of the equation.
Individual pavers may sit over different types of base, so what is underneath them can influence how the fencing needs to be supported.
This means two paved pool areas that look very similar from above may require different approaches.
Existing paving does not necessarily need to prevent you from considering glass fencing. The important point is determining what support is available beneath the proposed fence position and whether any additional work is needed.
Yes, glass pool fencing can be installed around pools with timber decking.
A deck is different from a solid paved or concrete area because the visible boards form part of a larger structure underneath. The fencing therefore needs to work with the deck itself rather than being considered separately from it.
This is particularly relevant for older decks or areas that were built before glass pool fencing was being considered.
Melbourne Glass Pool Fencing installs fencing on timber decking, so a deck does not automatically limit your pool fencing options.
Pool fencing does not always remain on a finished hard surface.
Some fence lines extend beyond paving into lawn, soil or another landscaped part of the property. Glass fencing can still be an option in these areas, provided suitable support can be created for the fence.
Melbourne Glass Pool Fencing can install fencing across lawn or soil using concrete footings in the ground.
This can be useful on properties where the required pool barrier extends beyond the main paved pool surround.
A change in ground level does not necessarily rule out glass pool fencing.
The important consideration is how the fence can respond to the change in height while still forming an appropriate pool barrier.
Rather than treating a sloping section as though it were flat, the fence arrangement may need to change as the ground rises or falls. The extent of this will depend on the gradient and the surrounding area.
Properties with significant level changes may require a more customised solution than a pool surrounded by one flat surface.
This is common in established Melbourne backyards.
A pool fence might begin beside a paved entertaining area, continue past timber decking and then meet a garden or lawn.
Having several surfaces does not necessarily mean separate fencing systems are required. It does mean that each part of the fence line needs to be considered according to what is underneath it.
The goal is to create one continuous pool barrier while responding appropriately to the different conditions around the property.
Not always.
One advantage of assessing the existing surroundings first is that the fencing can often be planned around what is already there.
Some properties will be relatively straightforward. Others may require additional preparation where a surface is unsuitable, damaged or unable to provide the support required.
It is better to identify those conditions before deciding that an existing deck, paved area or landscaped section needs major changes.
Concrete, paving and timber decking can all accommodate glass pool fencing, and fencing can also extend across lawn or soil where suitable footings are provided. Properties with sloping sections or a combination of surfaces may need a solution that responds to the individual site.
Melbourne Glass Pool Fencing works with a wide range of pool surrounds, including semi-frameless glass fencing and frameless channel glass pool fencing across Melbourne and can advise on the options available for your property.
Considering new pool fencing? Contact Melbourne Glass Pool Fencing on (03) 9898 9600 to discuss the surfaces around your pool and find out what glass fencing options may be suitable.